Maxicut MX-236CW ZNC Sinker

Featured at


Programmable Z Axis
Automatically control depth and generator settings from roughing to finishing cycles

Conversational G and M Code Programming
Simplifies programming and makes functions easier to learn

Password Protected Settings
The program can be password protected to prevent unauthorized changes

Auxiliary I/0
Ability to integrate ancillary devices such as rotary tables, indexers, and work piece handling systems

Linear Glass Scales with 1 Micron Resolution
Provides true, closed loop, position feedback for precise part positioning accuracy

Compact Machine Design
EDM generator is attached to the machine body and oil reservoir is in the base of the machine to reduce floor space and eliminate cables on the floor

FC-35 Grade Casting
High quality cast iron for increased rigidity and work piece capacity

External Data Transfer
Transfer programs with a USB memory stick or across a network using Ethernet

Adaptive Logic (Optional)
Difficult applications can be completed with no flushing without the risk of arcing


TRAVEL X Axis 15.7” (400 mm)
Y Axis 11.8” (300 mm)
Back Slide 9.0” (230 mm)
Z Axis 7.2” (185 mm)
OPEN HEIGHT * Minimum 3.3” (85 mm)
Maximum 19.6” (500 mm)
WORK TABLE Width 25.5” (650 mm)
Depth 13.7” (350 mm)

Width 39.3” (1,000 mm)
Depth 23.6” (600 mm)
Height ** 12.9” (330 mm)
Maximum Oil Level ** 11.0” (280 mm)
DIELECTRIC RESERVOIR Capacity 75 gal. (285 liters)

T Slot Platen

220 lb. (100 kg.)
Work Piece 2,200 lb.  (1,000 kg.)
GENERATOR Maximum Peak Current 100 A
On and Off Time 1 to 4000 µs
Width 92” (234 cm)
Depth 93” (238 cm)
Height 94” (240 cm)
Machine Tool WEIGHT 4,180 lb.  (1,900 kg.)
ENVIRONMENTAL Room Temperature 68 to 77˚F   (20 to 25˚C)
Relative Humidity 40% to 55%
UTILITIES Electrical 220VAC ±10%, 60 Hz, 11 KVA
Air 70 PSI @ 1 CFM   (5 BAR @ 1.7 CMH)

* Open Height is measured from the T-slot platen to the table.
** Work tank height and maximum oil level is measured from the top of the work table.