Maxicut MX-226C ZNC Sinker

Featured at


Programmable Z Axis with Eight Lines of Power Settings
Automatically control depth and generator settings from roughing to finishing cycles

One Button Cycle Start with Auto Fill and Auto Drain
Automatically the electrode will detect the surface, set zero, fill the work tank, start the flush pump, cut to depth, retract, and drain the work tank

Password Protected Settings
The program can be password protected to prevent unauthorized changes

Auxiliary I/0
Ability to integrate ancillary devices such as rotary tables, indexers, and work piece handling systems

Linear Glass Scales with 1 Micron Resolution
Provides true, closed loop, position feedback for precise part positioning accuracy

Compact Machine Design
EDM generator is attached to the machine body and oil reservoir is in the base of the machine to reduce floor space and eliminate cables on the floor

FC-35 Grade Casting
High quality cast iron for increased rigidity and work piece capacity

External Data Transfer
Transfer programs with a USB memory stick or across a network using Ethernet

Adaptive Logic (Optional)
Difficult applications can be completed with no flushing without the risk of arcing


TRAVEL X Axis 11.8” (300 mm)
Y Axis 9.8” (250 mm)
Back Slide 5.9” (230 mm)
Z Axis 5.9” (150 mm)
OPEN HEIGHT * Minimum 5.3” (150 mm)
Maximum 17.1” (135 mm)
WORK TABLE Width 23.6” (435 mm)
Depth 11.8” (600 mm)

Width 29.5” (300 mm)
Depth 19.6” (750 mm)
Height ** 9.4” (500 mm)
Maximum Oil Level ** 7.4” (240 mm)
DIELECTRIC RESERVOIR Capacity 50 gal. (190 liters)

T Slot Platen

220 lb. (100 kg.)
Work Piece 1,760 lb.  (800 kg.)
GENERATOR Maximum Peak Current 60 A
On and Off Time 1 to 4000 µs
Width 83” (212 cm)
Depth 86” (218 cm)
Height 98” (250 cm)
Machine Tool WEIGHT 2,750 lb.  (1,250 kg.)
ENVIRONMENTAL Room Temperature 68 to 77˚F   (20 to 25˚C)
Relative Humidity 40% to 55%
UTILITIES Electrical 220VAC ±10%, 60 Hz, 7.5 KVA
Air 70 PSI @ 1 CFM   (5 BAR @ 1.7 CMH)

* Open Height is measured from the T-slot platen to the table.
** Work tank height and maximum oil level is measured from the top of the work table.